-
QUICK FACTS- Load ratings up to 3000 lbs (1360 kg)
- Manual with Electric, Hydraulic or Pneumatic Operation
- Rotates 360º
- Quick-Disconnect Anchor
- Available in 5 finishes
- 2-Year Standard Warranty
SERIES MODELS- 5PT30-M1
-
Galvanized steel roof anchor with stamped single large D-Ring. Min breaking strength 5000 lbs. Meets or Exceeds ANSI Z359.18-2017 & A10.32-2012.
-
Roof Ridge Anchor. Galvanized Steel with dual stamped D-rings. Minimum breaking strength is 5000 lbs. Meets or Exceeds ANSI Z359.18-2017, A10.32-2012.
-
Parapet Anchor. Galvanized Steel. 2.36′′ – 14.17′′ parapet range. Min breaking strength 5000 lbs. Meets or exceeds ANSI Z359.1-2007.
-
24” Roof Tieback w/Baseplate Galvanized Finish, 5/8” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
-
24” Roof Tieback Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
-
18” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
-
18” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
-
Back Plate for 18” or 24” Roof Anchor Galvanized Steel Backer Plate 5/8” Thick. For Mounting 18” or 24” Roof Anchor to Beams or Other Structural Member.
-
12” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
-
Back Plate for 12” Roof Anchor 1/2” Thick. For Mounting 12” Roof Anchor to Beams or Other Structural Member.
-
Anchor Strap Loop Disposable Concrete Anchor Point Strap is attached to a structure capable of supporting 5000 lbs. 1-3/4″ x 4′ loop to loop with full length wear pad. Red strap. Various Lengths. Meets or Exceeds ANSI Z359.1-2007.
-
1/4” vinyl coated I-beam 4 ft. cable cross-over strap with large ring and small ring for pass-through. Meets or Exceeds ANSI Z359.1-2007.
-
Horizontal Lifeline system. Covers span length of 15’ to 100’. Min Breaking Strength 5620 lbs. Kernmantle rope of diameter 5/8″. Comes complete with carabiners, rope tensioner and carrying bag. Meets or Exceeds ANSI Z359.1-2007.
-
The Palmer Safety BeamGuard HLL Stanchion can be used in combination with any of Palmer Safety’s rope HLL kits and cable HLL kits. Able to accommodate up to two workers between each set of stanchions (maximum stanchion spacing is 60’), the BeamGuard has three base size options to allow for installation onto a variety of beam sizes. A Pass-Through Top Accessory is also available to facilitate 100% tie-off when transitioning between spans.
-
Horizontal Life Line System for four (4) workers. Covers a span length of 15 ft. to 100 ft. Min Breaking Strength of 5620 lbs. Our kit comes with a Kernmantle rope of 5/8” Dia. Comes complete with two carabiners, rope tensioner with tool, 6 ft. cross arm straps and a carrying bag.
-
This versatile, portable concrete/steel anchorage connector can be inserted inside precast concrete or steel flanges with a 3/4″ hole for lifting, hoisting, or tie-back. Palmer Safety’s Toggle Anchor is fully removable and reusable.
-
Disposable concrete anchor strap is attached to a structure capable of supporting 5000 lbs. 1-3/4” wide strap (variable lengths available) with a loop on one end, and either a large D-Ring or a loop on the other end, and a full length wear pad. Red strap. Meets or Exceeds ANSI Z359.1-2007 and OSHA.
-
5K MEGA Swivel Anchor. Designed for repeated use and is 100% retrievable (Concrete). Meets or Exceeds ANSI Z359.1-2007.
-
Reusable Concrete Anchor 3/4′′ Hole. 5000 lbs. Meets OSHA 1926-502, ANSI Z359.1, ANSI A10.32. This removable concrete anchor has an exclusive “Easy Button” feature that is sure to boost productivity by providing immediate anchor removal and instant user mobility. The anchor can be set as hard as desired without fear of it getting stuck. Can be used in horizontal, vertical and overhead applications.
-
- 100% nickel-plated with stainless steel fasteners
- Hoists are lubricated with FDA approved food-grade grease within the internal gearing
- Hoists have 316 stainless steel hand chain
- 0.5t & 1t capacities can be offered with optional stainless steel load chain, as well as stainless steel top & bottom hooks
- Hoist dimensions & performance specifications are identical to the Super 100 series
- Grippa corrosion-resistant trolleys are constructed with 100% stainless steel components
- 100% stainless steel beam clamps are also available
-
- 05.t ~ 20 ton
- Hand chain hoists, push & geared trolleys
- II 2 GD c II B T105 °C
- Adheres to the Council Directive and Standards in the EU for explosion-proof manual chain hoists. 94/9/EC : ATEX EN1127-1 :2008, EN13463-1 : 2009, EN13463-5 : 2003
-
- 0.5t through 20t Capacity
- Hand chain hoists, push & geared trolleys
- II 2 GD c II B T105 °C
- Adheres to the Council Directive and Standards in the EU for explosion proof manual chain hoists. 94/9/EC : ATEX EN1127-1 :2008, EN13463-1 : 2009, EN13463-5 : 2003
-
- Power cord length & hoist connection cable length for all trolleys is 1’ 7”
- MTS-0.5 is for Alpha Units 500kg and below.
- MTS-1 is for SA hoist 1 ton and below only
- MAS or MAF is for 3 phase hoists
- For special PB control lengths, please request at time of order
- Trolleys feature “plug & play” quick connect wiring (Alpha, Beta, & DA DB Series are hard wired)
- Power supply voltage for pendant control is 24v
-
Omnidirectional Double Cam Lock Screw Type Clamp
-
- Standard Hoists are Atex approved, EX II 2 GD IIC T4 (X) / EX II 2 GD IIB T4 (X) / EX II 2 GD IIC T4 (X)
- Copper platings and stainless steel components can be offered for increased spark resistance
- Lubrication free rotary vane motor. – Rust free & replaceable Stainless steel cylinder
- 100% Duty cycle
- Ideal for working in hazardous areas (Explosive environments)
- Temperature Rated -4°F to 158°F
- Insensitive to dust and humidity
- High Grade carbon steel swivel hooks with safety catches.
- Galvanized Grade 80 Load chain made to EN818 standard – 5:1 Design factor of safety
- Automatic self-adjusting multi disc brake 125% WLL.
- Tried and tested slip clutch design load limiting device set 130% WLL.
- Compact design and Lowest headroom in class.
- Anti-climb and Anti-drop devices standard.
- Pilot Pendant control with Emergency shut-off valve
- Compliant with ASME B30-11 and B30-16
-
- Standard Hoists are Atex approved, EX II 2 GD IIC T4 (X) / EX II 2 GD IIB T4 (X) / EX II 2 GD IIC T4 (X)
- Copper platings and stainless steel components can be offered for increased spark resistance
- Lubrication free rotary vane motor. – Rust free & replaceable Stainless steel cylinder
- 100% Duty cycle
- Ideal for working in hazardous areas (Explosive environments)
- Temperature Rated -4°F to 158°F
- Insensitive to dust and humidity
- High Grade carbon steel swivel hooks with safety catches.
- Galvanized Grade 80 Load chain made to EN818 standard – 5:1 Design factor of safety
- Automatic self-adjusting multi disc brake 125% WLL.
- Tried and tested slip clutch design load limiting device set 130% WLL.
- Compact design and Lowest headroom in class.
- Anti-climb and Anti-drop devices standard.
- Pilot Pendant control with Emergency shut-off valve
- Compliant with ASME B30-11 and B30-16
From overhead bridge cranes to overhead fall arrest our experienced team has the skill sets required to get the job done right. With safety as a top priority, our certified distributors, custom fabricators and team of highly resourceful integrators can accomplish any job.
Contact Us
Quick Links
Industry Updates
Subscribe for Cal-OSHA/OSHA/MSHA and other industry updates.
© 2022 All Rights Reserved. Powered by : iBrandPros.com