-
24” Roof Tieback w/Baseplate Galvanized Finish, 5/8” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012. -
24” Roof Tieback Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
-
18” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
-
18” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
-
Back Plate for 18” or 24” Roof Anchor Galvanized Steel Backer Plate 5/8” Thick. For Mounting 18” or 24” Roof Anchor to Beams or Other Structural Member.
-
12” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
-
Back Plate for 12” Roof Anchor 1/2” Thick. For Mounting 12” Roof Anchor to Beams or Other Structural Member.
-
Anchor Strap Loop Disposable Concrete Anchor Point Strap is attached to a structure capable of supporting 5000 lbs. 1-3/4″ x 4′ loop to loop with full length wear pad. Red strap. Various Lengths. Meets or Exceeds ANSI Z359.1-2007.
-
1/4” vinyl coated I-beam 4 ft. cable cross-over strap with large ring and small ring for pass-through. Meets or Exceeds ANSI Z359.1-2007.
-
Horizontal Lifeline system. Covers span length of 15’ to 100’. Min Breaking Strength 5620 lbs. Kernmantle rope of diameter 5/8″. Comes complete with carabiners, rope tensioner and carrying bag. Meets or Exceeds ANSI Z359.1-2007.
-
The Palmer Safety BeamGuard HLL Stanchion can be used in combination with any of Palmer Safety’s rope HLL kits and cable HLL kits. Able to accommodate up to two workers between each set of stanchions (maximum stanchion spacing is 60’), the BeamGuard has three base size options to allow for installation onto a variety of beam sizes. A Pass-Through Top Accessory is also available to facilitate 100% tie-off when transitioning between spans.
From overhead bridge cranes to overhead fall arrest our experienced team has the skill sets required to get the job done right. With safety as a top priority, our certified distributors, custom fabricators and team of highly resourceful integrators can accomplish any job.
Contact Us
Quick Links
Industry Updates
Subscribe for Cal-OSHA/OSHA/MSHA and other industry updates.
© 2022 All Rights Reserved. Powered by : iBrandPros.com