- Very small trolley approach dimensions meaning maximum utilization of the building’s width and height.
- The possibility of using the existing ceiling girder for securing the crane track.
-
-
- Standard Hoists are Atex approved, EX II 2 GD IIC T4 (X) / EX II 2 GD IIB T4 (X) / EX II 2 GD IIC T4 (X)
- Copper platings and stainless steel components can be offered for increased spark resistance
- Lubrication free rotary vane motor. – Rust free & replaceable Stainless steel cylinder
- 100% Duty cycle
- Ideal for working in hazardous areas (Explosive environments)
- Temperature Rated -4°F to 158°F
- Insensitive to dust and humidity
- High Grade carbon steel swivel hooks with safety catches.
- Galvanized Grade 80 Load chain made to EN818 standard – 5:1 Design factor of safety
- Automatic self-adjusting multi disc brake 125% WLL.
- Tried and tested slip clutch design load limiting device set 130% WLL.
- Compact design and Lowest headroom in class.
- Anti-climb and Anti-drop devices standard.
- Pilot Pendant control with Emergency shut-off valve
- Compliant with ASME B30-11 and B30-16
-
- Standard Hoists are Atex approved, EX II 2 GD IIC T4 (X) / EX II 2 GD IIB T4 (X) / EX II 2 GD IIC T4 (X)
- Copper platings and stainless steel components can be offered for increased spark resistance
- Lubrication free rotary vane motor. – Rust free & replaceable Stainless steel cylinder
- 100% Duty cycle
- Ideal for working in hazardous areas (Explosive environments)
- Temperature Rated -4°F to 158°F
- Insensitive to dust and humidity
- High Grade carbon steel swivel hooks with safety catches.
- Galvanized Grade 80 Load chain made to EN818 standard – 5:1 Design factor of safety
- Automatic self-adjusting multi disc brake 125% WLL.
- Tried and tested slip clutch design load limiting device set 130% WLL.
- Compact design and Lowest headroom in class.
- Anti-climb and Anti-drop devices standard.
- Pilot Pendant control with Emergency shut-off valve
- Compliant with ASME B30-11 and B30-16
-
KIT INCLUDES: The KATTCLIMB® Ladder Fall Arrest System is a safe and secure way to arrest falls when working at height. Our fall protection ladder system consists of lightweight, high-quality materials that are easy to handle and install. This listing ships as a kit for a single, fast delivery and includes the components you need to get started, including:- Stainless steel cable (to suit height required)
- Ladder mounting bracket system
- Tensioner device
- Termination device
- Cable guides (for heights over 26 ft.)
- Traveler Device
- Full Body Harness with Front D-Ring
-
The SKYTAC climbing protection system allows you to climb safely up or down to any height or depth on installed vertical ladders. The guide rail with a C profile is made from 3mm wide galvanized steel and the rungs have an extra zinc layer for better protection against corrosion. To enhance the safety of users of the climbing protection system, SKYLOTEC has developed the SPEED, the only runner in the world with two redundant brake systems and a catch function that works according to speed. The principle behind SPEED is simple: the lock system is hidden in the housing and is therefore protected against unwanted access. An additional lever means that SPEED works like a pull-back runner. The runner is short and so, therefore, is the fall distance. This makes it easier to climb and also reduces injuries caused during falls. In the event of a failure of the pull-back system, whether through misuse or unfortunate circumstances, the runner can only reach a maximum pre-set speed. If this speed is exceeded, the second safety catch independently kicks in: a centrifugal brake swings the lock system out and the runner is blocked. A high number of catch in the TAC rail allow a very short fall distance. This significantly reduces the risk of injury in the event of a possible fall. -
QUICK FACTS
- Up to 7000 lbs Line Load
- Cable Keepers on Top and Sides of Sheave
- Five Sizes for Different Rope Diameters
- Sealed Needle Roller Bearing with Grease Fitting
- Durable Powder Coat Finish
- Design in Accordance with ASME B30.26
- Two Year Warranty
SERIES MODELS- VLB-G25 — for 1/4″ Rope
- VLB-G31 — for 5/16″ Rope
- VLB-G38 — for 3/8″ Rope
- VLB-G44 — for 7/16″ Rope
- VLB-G50 — for 1/2″ Rope
-
Spanco Workstation Jib Cranes offer easy, ergonomic lifting and transfer of repetitive loads. These small, nimble cranes are faster than motorized jibs and are very affordable. Our workstation jibs can be permanently foundation-mounted, portable with counterweight bases, wall-mounted, or foundationless to best suit your needs:
501 Series Wall-Mounted Workstation Jib Cranes
- 180-degree rotation
- Bolts to existing wall or column
- Bronze bearings at the pivot points ensure easy rotation
-
401 Series Wall-Mounted Articulating Jib Cranes
- Offers 360-degree rotation for outer arm and 180-degree rotation for inner arm
- Perfect for individual workstations where each worker needs complete access to one jib crane
- Outstanding headroom permits installation in tight locations and crowded shops
- Provides a clear work area with no floor obstructions and requires minimal overhead clearance for installation
-
Highlighted Features:- Capacity: Supports loads up to several tons
- Range of Motion: 180-degree rotation for comprehensive coverage
- Construction: Robust, high-strength steel construction
- Installation: Mounts on walls or columns to save floor space
- Versatility: Suitable for tight spaces and low headroom areas
- Safety: Adheres to OSHA regulations, reducing workplace injuries
- Efficiency: Improves load handling and workflow
