-
Manufactured in South Korea
-
Completely repairable with easy access design (1/4 ton is not repairable)
-
Load tested to 150% of rated capacity
-
Meets ANSI/ASME standards
-
Single-hand control of free-chain function with load brake
-
Low temperature grease functions at -45°C (-49° F)
-
-
-
Manufactured in South Korea
-
Completely repairable with easy access design (1/4 ton is not repairable)
-
Load tested to 150% of rated capacity
-
Meets ANSI/ASME standards
-
Single-hand control of free-chain function with load brake
-
Low temperature grease functions at -45°C (-49° F)
-
-
-
Manufactured in South Korea
-
Completely repairable with easy access design (1/4 ton is not repairable)
-
Load tested to 150% of rated capacity
-
Meets ANSI/ASME standards
-
Single-hand control of free-chain function with load brake
-
Low temperature grease functions at -45°C (-49° F)
-
-
-
Manufactured in South Korea
-
Completely repairable with easy access design (1/4 ton is not repairable)
-
Load tested to 150% of rated capacity
-
Meets ANSI/ASME standards
-
Single-hand control of free-chain function with load brake
-
Low temperature grease functions at -45°C (-49° F)
-
-
SA TYPE : 1 PHASE, 1 SPEED
-
FA TYPE : 1 SPEED, 3 PHASE DUAL VOLTAGE FB TYPE: 2 SPEED, 3 PHASE SINGLE VOLTAGE
-
DA TYPE : 1 SPEED, 3 PHASE SINGLE VOLTAGE DB TYPE: 2 SPEED, 3 PHASE SINGLE VOLTAGE
-
- Designed to offer longevity in Clean Room, Food Grade, and Corrosive Environments
- Finish : Nickel chrome plated hoist body, nickel plated load chain, nickel plated top & bottom hook, and 100% stainless steel chain container
- Hoists are IP 54 with IP65, NEMA 4X, pendants. Sealed from splashing water in any direction, and the ingress of dust.
- Available in the FA and SA series electric chain hoists
- Hoists dimensions & specifications are identical to the SA and FA hoists
-
- 0.25t ~ 10 ton
- Overload Protection Safety Device, Standard on 1t Capacity and Greater
- A High Quality Urethane Paint
- Heavy Duty Single Braid Wire Reinforced Air Hose with Swivel Fittings on each end
- Galvanized Load Chain for Corrosion Resistance
- Meets ASME B30.16 standards
- Pendant Control Machined from Solid Brass for Corrosion Resistant and Spark Resistance with an Emergency Stop Button. Available in Aluminum as well.
- Yielding style buffers stall the motor
- Upper Hook with a Safety Factor of 5X the Nominal Load
- Low-maintenance motor for clean use within Food Grade, Petrochemical, and Pharmaceutical Environments
- Heat Treated and Rust-Free Motor Components with Removable Stainless Steel Cylinder, Allow for Operational Longevity and Low Cost Replacement
- Air Valve is 100% Nickel Plated inside and out for Corrosion Resistance.
- Infinitely Variable Speed Via Pull Cord Control
-
- 16t ~ 100t
- Overload Protection Safety Device, Standard on 1t Capacity and Greater
- A High Quality Urethane Paint
- Heavy Duty Single Braid Wire Reinforced Air Hose with Swivel Fittings on each end
- Galvanized Load Chain for Corrosion Resistance
- Meets ASME B30.16 standards
- Pendant Control Machined from Solid Brass for Corrosion Resistant and Spark Resistance with an Emergency Stop Button. Available in Aluminium as well.
- Upper Hook with a Safety Factor of 5X the Nominal Load
- Low-maintenance lubrication free Rotary Vane Motor for clean use within Food Grade, Petrochemical, and Pharmaceutical Environments
- Heat Treated and Rust-Free Motor Components with Removable Stainless Steel Cylinder, Allow for Operational Longevity and Low Cost Replacement
- Air Valve is 100% Nickel Plated inside and out for Corrosion Resistance.Infinitely Variable Speed Via Pull Cord Control
-
- 0.25t ~ 50 ton
- Overload Protection Safety Device, Standard on 1t Capacity and Greater
- A High Quality Urethane Paint
- Heavy Duty Single Braid Wire Reinforced Air Hose with Swivel Fittings on each end
- Galvanized Load Chain for Corrosion Resistance
- Meets ASME B30.16 standards
- Pendant Control Machined from Solid Brass for Corrosion Resistant and Spark Resistance with an Emergency Stop Button. Available in Aluminium as well.
- Upper Hook with a Safety Factor of 5X the Nominal Load
- Low-maintenance lubrication free Rotary Vane Motor for clean use within Food Grade, Petrochemical, and Pharmaceutical Environments
- Heat Treated and Rust-Free Motor Components with Removable Stainless Steel Cylinder, Allow for Operational Longevity and Low Cost Replacement
- Air Valve is 100% Nickel Plated inside and out for Corrosion Resistance.
- Infinitely Variable Speed Via Pull Cord Control
-
- 1t ~ 6 tons
- Overload Protection Safety Device, Standard on 1t Capacity and Greater
- A High Quality Urethane Paint
- Heavy Duty Single Braid Wire Reinforced Air Hose with Swivel Fittings on each end
- Galvanized Load Chain for Corrosion Resistance
- Meets ASME B30.16 standards
- Pendant Control Machined from Solid Brass for Corrosion Resistant and Spark Resistance with an Emergency Stop Button. Available in Aluminium as well.
- Upper Hook with a Safety Factor of 5X the Nominal Load
- Low-maintenance lubrication free Rotary Vane Motor for clean use within Food Grade, Petrochemical, and Pharmaceutical Environments
- Heat Treated and Rust-Free Motor Components with Removable Stainless Steel Cylinder, Allow for Operational Longevity and Low Cost Replacement
- Air Valve is 100% Nickel Plated inside and out for Corrosion Resistance.
- Infinitely Variable Speed Via Pull Cord Control
-
- Lubrication free rotary vane motor – Rust free & replaceable stainless steel cylinder
- 100% Duty cycle
- Robust epicycle gearbox (grease filled and sealed)
- Choice pilot pendant with E-Stop or direct pendant control – Variable speed
- Urethane yielding buffers for upper and lower limit stops
- Aluminium and SG Iron housings
- Internal silencing
- High grade carbon steel swivel hooks with safety catches
- Galvanized Grade 80 Load chain made to EN818-7 standard – 5:1 Design factor of safety
- Automatic self-adjusting multi disc brake 125% WLL
- Tried and tested delta P design load limiting device set 130% WLL*
- Spark resistant (Atex Zone 2)
-
- 10t ~ 60 ton
- Standard Hoists are Atex approved, EX II 2 GD IIC T4 (X) / EX II 2 GD IIB T4 (X) / EX II 2 GD IIC T4 (X)
- Copper platings and stainless steel components can be offered for increased spark resistance
- Rust free & replaceable Stainless steel cylinder
- 100% Duty cycle
- Ideal for working in hazardous areas (Explosive environments)
- Temperature Rated -4°F to 158°F
- Insensitive to dust and humidity
- High Grade carbon steel swivel hooks with safety latches
- Galvanized Grade 80 Load chain made to EN818 standard – 5:1 Design factor of safety
- Automatic self-adjusting multi disc brake 125% WLL.
- Tried and tested slip clutch design load limiting device set 130% WLL.
- Compact design and Lowest headroom in class.
- Anti-climb and Anti-drop devices standard.
- Pilot Pendant control with Emergency shut-off valve
- Complaint with ASME B30.16
-
- Standard Hoists are Atex approved, EX II 2 GD IIC T4 (X) / EX II 2 GD IIB T4 (X) / EX II 2 GD IIC T4 (X)
- Copper platings and stainless steel components can be offered for increased spark resistance
- Lubrication free rotary vane motor. – Rust free & replaceable Stainless steel cylinder
- 100% Duty cycle
- Ideal for working in hazardous areas (Explosive environments)
- Temperature Rated -4°F to 158°F
- Insensitive to dust and humidity
- High Grade carbon steel swivel hooks with safety catches.
- Galvanized Grade 80 Load chain made to EN818 standard – 5:1 Design factor of safety
- Automatic self-adjusting multi disc brake 125% WLL.
- Tried and tested slip clutch design load limiting device set 130% WLL.
- Compact design and Lowest headroom in class.
- Anti-climb and Anti-drop devices standard.
- Pilot Pendant control with Emergency shut-off valve
- Compliant with ASME B30-11 and B30-16
-
Blow Out Preventers on land and offshore drilling rigs. ATS Pneumatic’s BOP systems have been engineered to meet or exceed current regulations set forth for the oil well drilling industry.
-
- Rust free & replaceable stainless steel cylinder.
- 100% duty cycle.
- Ideal for working in hazardous areas (explosive environments).
- Temperature rated -20°C to 70°C.
- Insensitive to dust and humidity.
- Designed to conform with ASME 30.7 and FEM Classification 1Bm.
- Designed with a 5:1 factor of safety for lifting.
- Automatic self-adjusting multi disc brake 125% WLL
- Tried and tested Delta P load limiting device set 130% WLL for all CE model (lifting only).
- Spark resistant (Atex Zone 1 & 2).
- Compact design and lowest weight in class.
- Pilot pendant control with emergency shut-off valve or Variable speed toggle control.
- OPTIONAL Declutchable drum on Tugger versions for free spooling.
- Individually load tested before shipment – Delivered with Load Test Certificate.
-
Heavy Duty 0.8 ~ 12 ton capacity
-
Overload Protection 0.8 ~ 9 ton
-
Overload Protection 0.8 ~ 9 ton
-
150 kg ~ 0.5 ton
