Horizontal Life Line System for four (4) workers. Covers a span length of 15 ft. to 100 ft. Min Breaking Strength of 5620 lbs. Our kit comes with a Kernmantle rope of 5/8” Dia. Comes complete with two carabiners, rope tensioner with tool, 6 ft. cross arm straps and a carrying bag.

Back Plate for 12” Roof Anchor 1/2” Thick. For Mounting 12” Roof Anchor to Beams or Other Structural Member.

18” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.

18” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.

Reusable Concrete Anchor 3/4′′ Hole. 5000 lbs. Meets OSHA 1926-502, ANSI Z359.1, ANSI A10.32. This removable concrete anchor has an exclusive “Easy Button” feature that is sure to boost productivity by providing immediate anchor removal and instant user mobility. The anchor can be set as hard as desired without fear of it getting stuck. Can be used in horizontal, vertical and overhead applications.

This versatile, portable concrete/steel anchorage connector can be inserted inside precast concrete or steel flanges with a 3/4″ hole for lifting, hoisting, or tie-back. Palmer Safety’s Toggle Anchor is fully removable and reusable.

• Custom heights, spans, and support structures
• Single, dual, or multiple tracks for one, two, or multiple workers
• Intermediate bumpers can be used to limit trolley travel between the factory-installed end stops for any reason
• Cart kits transform the disassembled system into a transportable handcart
• Detachable height-adjustment kits eliminate the need for an overhead hoist or forklift truck for height adjustments
• Foam-filled pneumatic tires
• Nylacron casters
• Any color paint, epoxy coatings, or galvanized finish
• Mylar® lip seal for heavy dust or paint overspray applications

QUICK FACTS

• Load ratings up to 3000 lbs (1360 kg)
• Manual with Electric, Hydraulic or Pneumatic Operation
• Rotates 360º
• Quick-Disconnect Anchor
• Available in 5 finishes
• 2-Year Standard Warranty

SERIES MODELS

• 5PT30-M1

Roof Ridge Anchor. Galvanized Steel with dual stamped D-rings. Minimum breaking strength is 5000 lbs. Meets or Exceeds ANSI Z359.18-2017, A10.32-2012.

Anchor Strap Loop Disposable Concrete Anchor Point Strap is attached to a structure capable of supporting 5000 lbs. 1-3/4″ x 4′ loop to loop with full length wear pad. Red strap. Various Lengths. Meets or Exceeds ANSI Z359.1-2007.

• 500 Series Anchor Trolley

The Palmer Safety BeamGuard HLL Stanchion can be used in combination with any of Palmer Safety’s rope HLL kits and cable HLL kits. Able to accommodate up to two workers between each set of stanchions (maximum stanchion spacing is 60’), the BeamGuard has three base size options to allow for installation onto a variety of beam sizes. A Pass-Through Top Accessory is also available to facilitate 100% tie-off when transitioning between spans.