• Horizontal Life Line System for four (4) workers. Covers a span length of 15 ft. to 100 ft. Min Breaking Strength of 5620 lbs. Our kit comes with a Kernmantle rope of 5/8” Dia. Comes complete with two carabiners, rope tensioner with tool, 6 ft. cross arm straps and a carrying bag.
  • Back Plate for 12” Roof Anchor 1/2” Thick. For Mounting 12” Roof Anchor to Beams or Other Structural Member.
  • 12” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
  • Back Plate for 18” or 24” Roof Anchor Galvanized Steel Backer Plate 5/8” Thick. For Mounting 18” or 24” Roof Anchor to Beams or Other Structural Member.
  • 18” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
  • 18” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
  • 24” Roof Tieback Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
  • 24” Roof Tieback w/Baseplate Galvanized Finish, 5/8” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
  • Reusable Concrete Anchor 3/4′′ Hole. 5000 lbs. Meets OSHA 1926-502, ANSI Z359.1, ANSI A10.32. This removable concrete anchor has an exclusive “Easy Button” feature that is sure to boost productivity by providing immediate anchor removal and instant user mobility. The anchor can be set as hard as desired without fear of it getting stuck. Can be used in horizontal, vertical and overhead applications.
  • This versatile, portable concrete/steel anchorage connector can be inserted inside precast concrete or steel flanges with a 3/4″ hole for lifting, hoisting, or tie-back. Palmer Safety’s Toggle Anchor is fully removable and reusable.
    • 20-foot model (Part number C8000)
    • 30-foot model (Part number C8001)
  • Elevate your lifting operations with our Adjustable Spreader/Lifting Beam, designed to handle uneven loads with exceptional stability and increased safety. This versatile tool features multiple adjustable bails, allowing for precise positioning and control to accommodate various load sizes and conditions. The bails slide effortlessly within robust C-Channels, ensuring a secure and balanced lift every time. Built to meet rigorous industry standards, this lifting beam is engineered for performance and durability. Its baked-in powder-coated finish adds an extra layer of toughness, making it resistant to wear and environmental conditions. Ideal for environments with limited headroom, it offers a practical solution without compromising on functionality. With its combination of flexibility, safety, and robust construction, our Adjustable Spreader/Lifting Beam is an essential addition to your lifting equipment, ensuring efficient and safe operations across a wide range of industrial applications.
    • Custom heights, spans, and support structures
    • Single, dual, or multiple tracks for one, two, or multiple workers
    • Intermediate bumpers can be used to limit trolley travel between the factory-installed end stops for any reason
    • Cart kits transform the disassembled system into a transportable handcart
    • Detachable height-adjustment kits eliminate the need for an overhead hoist or forklift truck for height adjustments
    • Foam-filled pneumatic tires
    • Nylacron casters
    • Any color paint, epoxy coatings, or galvanized finish
    • Mylar® lip seal for heavy dust or paint overspray applications
  • QUICK FACTS
    • Load ratings up to 3000 lbs (1360 kg)
    • Manual with Electric, Hydraulic or Pneumatic Operation
    • Rotates 360º
    • Quick-Disconnect Anchor
    • Available in 5 finishes
    • 2-Year Standard Warranty
    SERIES MODELS
    • 5PT30-M1
  • 1/4” vinyl coated I-beam 4 ft. cable cross-over strap with large ring and small ring for pass-through. Meets or Exceeds ANSI Z359.1-2007.
  • 5K MEGA Swivel Anchor. Designed for repeated use and is 100% retrievable (Concrete). Meets or Exceeds ANSI Z359.1-2007.
  • Roof Ridge Anchor. Galvanized Steel with dual stamped D-rings. Minimum breaking strength is 5000 lbs. Meets or Exceeds ANSI Z359.18-2017, A10.32-2012.
  • Anchor Strap Loop Disposable Concrete Anchor Point Strap is attached to a structure capable of supporting 5000 lbs. 1-3/4″ x 4′ loop to loop with full length wear pad. Red strap. Various Lengths. Meets or Exceeds ANSI Z359.1-2007.
  • Disposable concrete anchor strap is attached to a structure capable of supporting 5000 lbs. 1-3/4” wide strap (variable lengths available) with a loop on one end, and either a large D-Ring or a loop on the other end, and a full length wear pad. Red strap. Meets or Exceeds ANSI Z359.1-2007 and OSHA.
    • Plain or trussed track
    • Stainless steel track
    • Aluminum track
    • Side-mount track
    • Curved track accommodates almost any degree curve
    • Any color paint, epoxy coatings, or galvanized finish
    • Single track, dual track, or multiple tracks
    • Mylar® lip seal for heavy dust or paint overspray applications
    • Intermediate bumpers can be installed to designate multiple work areas on a single section of track
  • The Palmer Safety BeamGuard HLL Stanchion can be used in combination with any of Palmer Safety’s rope HLL kits and cable HLL kits. Able to accommodate up to two workers between each set of stanchions (maximum stanchion spacing is 60’), the BeamGuard has three base size options to allow for installation onto a variety of beam sizes. A Pass-Through Top Accessory is also available to facilitate 100% tie-off when transitioning between spans.
    • 20-foot model (Part number C9000)
    • 30-foot model (Part number C9001)
  • 50-foot model (Part number C7002)
  • QUICK FACTS
    • Load ratings up to 2000 lbs (907 kg)
    • Manual, Drill Drivable, Electric, Hydraulic or Pneumatic Operation
    • Rotates 360º
    • Quick-Disconnect Anchor
    • Available in 2 finishes
    • 2-Year Standard Warranty
    SERIES MODELS
    • 5FT20
    • 5FT25
    • 5FT40
    • 5FT40H
  • QUICK FACTS
    • Load ratings up to 2800 lbs (1270 kg)
    • Manual, Drill Drivable, Electric, Hydraulic or Pneumatic Operation
    • Rotates 360º
    • Available in 2 finishes
    • 2-Year Standard Warranty
    SERIES MODELS
    • 5FT20
    • 5FT25
    • 5FT40
    • 5FT40H
  • QUICK FACTS
    • Massive Lifting Power up to 5,500 pounds (2,500 kg)
    • Manual, Drill-Drive, Electric, Hydraulic, or Pneumatic Operation
    • New Integral Slewing Drive Allows 360º of Smooth and Easy Rotation
    • Available in Three Finishes
    • Optional Hydraulic Boom Adjustment Package
    • Industry-Leading Warranty
    SERIES MODELS
    • 5FT20
    • 5FT25
    • 5FT40
    • 5FT40H
  • Elevate stage management and functionality with a selection of manual or powered clew winches, tailored for precise handling of lights, scenery, curtains, and other multi-line loads. These winches are capable of lifting up to 2,500 lbs to heights of up to 40 feet, featuring integrated brakes and lock mechanisms to ensure safety and control in a compact design. The powered models add further convenience with secondary brakes, rotary limit switches, and straightforward push-button operations. Designed to integrate seamlessly into any theatrical rigging system, these clew winches offer a combination of robust performance and ease of use. Their modular design provides the flexibility to choose specific components that meet the unique demands of different staging environments. Constructed from durable, heavy-duty materials, these winches are built to last and come with features that promote long service life and reliability.
    • Custom heights, spans, and support structures
    • Column-mounted, foundation mounted (freestanding), or mounted to a mobile, counterweighted base
    • Boom lock (Exception: A boom lock is required for Portable Base Swing Arm systems)
    • Single, dual, or multiple tracks for one, two, or multiple workers (except for the two-person capacity Portable Base Swing Arm)
    • Intermediate bumpers can be used to limit trolley travel between the factory-installed end stops for any reason
    • Any color paint, epoxy coatings, or galvanized finish
    • Mylar® lip seal for heavy dust or paint overspray applications
  • QUICK FACTS
    • Load ratings up to 1200 lbs (544 kg)
    • Electric, Hydraulic or Pneumatic Operation
    • Rotates 360º
    • Quick-Disconnect Anchor
    • Available in 5 finishes
    • 2-Year Standard Warranty
    SERIES MODELS
    • SPT5
    • 5PT10
    • 5PT20
  • QUICK FACTS
    • Load ratings up to 2000 lbs (907 kg)
    • Rugged and affordable
    • Manual or power operation
    • Rotates 360º
    • Portable
    • No-tools assembly/disassembly
    • 5 Corrosion-resistant finishes
    • Variety of bases
    • 2-Year Standard Warranty
    SERIES MODELS
    • 5PT5
    • 5PT10
    • 5PT20
  • QUICK FACTS
    • Load ratings up to 650 lbs (300 kg)
    • Electric, Hydraulic or Pneumatic Operation
    • Rotates 360º
    • Quick-Disconnect Anchor
    • Available in 5 finishes
    • 2-Year Standard Warranty
    SERIES MODELS
    • 5PT5
    • 5PT10
    • 5PT20
    • 100% nickel-plated with stainless steel fasteners
    • Hoists are lubricated with FDA approved food-grade grease within the internal gearing
    • Hoists have 316 stainless steel hand chain
    • 0.5t & 1t capacities can be offered with optional stainless steel load chain, as well as stainless steel top & bottom hooks
    • Hoist dimensions & performance specifications are identical to the Super 100 series
    • Grippa corrosion-resistant trolleys are constructed with 100% stainless steel components
    • 100% stainless steel beam clamps are also available
    • Power cord length & hoist connection cable length for all trolleys is 1’ 7”
    • MTS-0.5 is for Alpha Units 500kg and below.
    • MTS-1 is for SA hoist 1 ton and below only
    • MAS or MAF is for 3 phase hoists
    • For special PB control lengths, please request at time of order
    • Trolleys feature “plug & play” quick connect wiring (Alpha, Beta, & DA DB Series are hard wired)
    • Power supply voltage for pendant control is 24v

Title

Go to Top