-
Overload Protection 0.8 ~ 9 ton -
Overload Protection 0.8 ~ 9 ton
-
Heavy Duty 0.8 ~ 12 ton capacity
-
Spanco Workstation Jib Cranes offer easy, ergonomic lifting and transfer of repetitive loads. These small, nimble cranes are faster than motorized jibs and are very affordable. Our workstation jibs can be permanently foundation-mounted, portable with counterweight bases, wall-mounted, or foundationless to best suit your needs:
Features of Spanco 500-Series Freestanding Workstation Jib Cranes
- 360-degree rotation
- Standard crane heights to 12 feet (floor to bottom of boom); taller designs available
- Mounting plates attach with anchor bolts to standard 6-inch reinforced concrete floor, or to new foundations for special load conditions
- Smaller capacity cranes use square mounting plates with welded gussets connected to the mast; each plate uses four anchor bolts
- Larger capacity cranes use hexagonal mounting plates with welded gussets connected to the mast; each plate uses 6 anchor bolts
-
Experience the power and reliability of Wire Rope Hoists, designed to meet the challenges of your everyday business operations. These hoists feature a large drum diameter that enables near true vertical lift and a frame design that allows for close approaches. With capacities ranging from 0.5 to 80 tons and lifting distances from 13 to 320 ft, the Wire Rope Hoists offers exceptional performance. They come in standard electric configurations, including normal headroom, low headroom, and double girder models. Designed to maximize operational efficiency, Wire Rope Hoists are ideal for various applications across industries. These hoists offer easy operation with excellent headroom, minimized hook drift, and increased end approaches. Additionally, the innovative gear case design reduces stress on drum bearings, resulting in lower maintenance needs and extended equipment lifespan. Trust in the reliability and performance of Wire Rope Hoists for your lifting requirements. -
Omnidirectional Double Cam Lock Screw Type Clamp
-
Spanco Wall-Traveling Jib Cranes are cost-effective, custom-engineered solutions that are specifically designed to meet your production needs and building specifications. You can cover an entire series of workstations using one agile wall-traveling crane for virtually the entire length of your building.
Features of Spanco Wall-Traveling Jib Cranes
- Jib boom is fabricated from standard “S” beam with vertical angle truss to reduce deflection; jib boom and truss bolt onto the back frame—no welding needed
- End trucks are constructed from channel beam frames and resist twisting; the end trucks are jig-fixed for optimal fit and travel. End trucks bolt onto the jib’s back frame
- Top-running end trucks include double-flanged crane wheels made from forged steel for long service life
- Crane drive has an electric motor with worm gear reducer
- Two-speed controls include mainline contactor, control transformer, inverter acceleration control, and fuses in NEMA 3R, 4, or 12 enclosures
- Variable frequency drives (VFDs) for multi-speed operation
-
401 Series Wall-Mounted Articulating Jib Cranes
- Offers 360-degree rotation for outer arm and 180-degree rotation for inner arm
- Perfect for individual workstations where each worker needs complete access to one jib crane
- Outstanding headroom permits installation in tight locations and crowded shops
- Provides a clear work area with no floor obstructions and requires minimal overhead clearance for installation
-
Spanco Workstation Jib Cranes offer easy, ergonomic lifting and transfer of repetitive loads. These small, nimble cranes are faster than motorized jibs and are very affordable. Our workstation jibs can be permanently foundation-mounted, portable with counterweight bases, wall-mounted, or foundationless to best suit your needs:
501 Series Wall-Mounted Workstation Jib Cranes
- 180-degree rotation
- Bolts to existing wall or column
- Bronze bearings at the pivot points ensure easy rotation
-
QUICK FACTS
- Up to 7000 lbs Line Load
- Cable Keepers on Top and Sides of Sheave
- Five Sizes for Different Rope Diameters
- Sealed Needle Roller Bearing with Grease Fitting
- Durable Powder Coat Finish
- Design in Accordance with ASME B30.26
- Two Year Warranty
SERIES MODELS- VLB-G25 — for 1/4″ Rope
- VLB-G31 — for 5/16″ Rope
- VLB-G38 — for 3/8″ Rope
- VLB-G44 — for 7/16″ Rope
- VLB-G50 — for 1/2″ Rope
-
The SKYTAC climbing protection system allows you to climb safely up or down to any height or depth on installed vertical ladders. The guide rail with a C profile is made from 3mm wide galvanized steel and the rungs have an extra zinc layer for better protection against corrosion. To enhance the safety of users of the climbing protection system, SKYLOTEC has developed the SPEED, the only runner in the world with two redundant brake systems and a catch function that works according to speed. The principle behind SPEED is simple: the lock system is hidden in the housing and is therefore protected against unwanted access. An additional lever means that SPEED works like a pull-back runner. The runner is short and so, therefore, is the fall distance. This makes it easier to climb and also reduces injuries caused during falls. In the event of a failure of the pull-back system, whether through misuse or unfortunate circumstances, the runner can only reach a maximum pre-set speed. If this speed is exceeded, the second safety catch independently kicks in: a centrifugal brake swings the lock system out and the runner is blocked. A high number of catch in the TAC rail allow a very short fall distance. This significantly reduces the risk of injury in the event of a possible fall. -
KIT INCLUDES: The KATTCLIMB® Ladder Fall Arrest System is a safe and secure way to arrest falls when working at height. Our fall protection ladder system consists of lightweight, high-quality materials that are easy to handle and install. This listing ships as a kit for a single, fast delivery and includes the components you need to get started, including:- Stainless steel cable (to suit height required)
- Ladder mounting bracket system
- Tensioner device
- Termination device
- Cable guides (for heights over 26 ft.)
- Traveler Device
- Full Body Harness with Front D-Ring
-
- Standard Hoists are Atex approved, EX II 2 GD IIC T4 (X) / EX II 2 GD IIB T4 (X) / EX II 2 GD IIC T4 (X)
- Copper platings and stainless steel components can be offered for increased spark resistance
- Lubrication free rotary vane motor. – Rust free & replaceable Stainless steel cylinder
- 100% Duty cycle
- Ideal for working in hazardous areas (Explosive environments)
- Temperature Rated -4°F to 158°F
- Insensitive to dust and humidity
- High Grade carbon steel swivel hooks with safety catches.
- Galvanized Grade 80 Load chain made to EN818 standard – 5:1 Design factor of safety
- Automatic self-adjusting multi disc brake 125% WLL.
- Tried and tested slip clutch design load limiting device set 130% WLL.
- Compact design and Lowest headroom in class.
- Anti-climb and Anti-drop devices standard.
- Pilot Pendant control with Emergency shut-off valve
- Compliant with ASME B30-11 and B30-16
-
- Standard Hoists are Atex approved, EX II 2 GD IIC T4 (X) / EX II 2 GD IIB T4 (X) / EX II 2 GD IIC T4 (X)
- Copper platings and stainless steel components can be offered for increased spark resistance
- Lubrication free rotary vane motor. – Rust free & replaceable Stainless steel cylinder
- 100% Duty cycle
- Ideal for working in hazardous areas (Explosive environments)
- Temperature Rated -4°F to 158°F
- Insensitive to dust and humidity
- High Grade carbon steel swivel hooks with safety catches.
- Galvanized Grade 80 Load chain made to EN818 standard – 5:1 Design factor of safety
- Automatic self-adjusting multi disc brake 125% WLL.
- Tried and tested slip clutch design load limiting device set 130% WLL.
- Compact design and Lowest headroom in class.
- Anti-climb and Anti-drop devices standard.
- Pilot Pendant control with Emergency shut-off valve
- Compliant with ASME B30-11 and B30-16
-
- Very small trolley approach dimensions meaning maximum utilization of the building’s width and height.
- The possibility of using the existing ceiling girder for securing the crane track.
-
- Ultra-low profile design
- Tight headroom
- Hoist and hand geared / push type combo
- Articulated design for special beams
- Can accommodate beams with abnormally aggressive curves
- Dual pivoting points on the trolleys allow for smooth navigation of the beam
- Corrosion-resistant packages are available
- Marine-grade finishes are available
- Spark resistant features are available
From overhead bridge cranes to overhead fall arrest our experienced team has the skill sets required to get the job done right. With safety as a top priority, our certified distributors, custom fabricators and team of highly resourceful integrators can accomplish any job.
Contact Us
Quick Links
Industry Updates
Subscribe for Cal-OSHA/OSHA/MSHA and other industry updates.
© 2022 All Rights Reserved. Powered by : iBrandPros.com